Skip to main content

Autodarts X connection

For unboxing and fitting the X to your board, see Winmau's Autodarts X user guide.

How the X connects​

Setting up an X always starts with a USB-C cable from the X to your phone or tablet, in the Autodarts app. Once it's set up, you can keep it on the cable or switch to Wi-Fi.

The cable is the most reliable choice, with the X's own power adapter plugged in as well: it isn't affected by your Wi-Fi at all, and it charges your phone or tablet at the same time. If you need a longer cable, it has to be a data cable. Cables sold only for charging carry power but no data, so the X won't connect through them.

Only use the power adapter that came with the X.

The X keeps losing its connection​

  1. Use the cable if you can; see above.
  2. On Wi-Fi, use your router's 5 GHz network. 2.4 GHz works, but is less reliable. (Many routers offer both, often as two network names, one ending in "5G".)
  3. Restart the X: switch it off, wait at least 10 seconds, and switch it on again.

Starting over​

The X has no factory reset. To start again from scratch, connect it to your phone or tablet with the USB-C cable and run the setup in the app again. That rebuilds its connection completely.

Don't press the small switch above the power button. It isn't meant for everyday use.

Updating the X​

Updates for the X (its firmware, the software inside the device) arrive through the Autodarts app. Connect the X with the cable, and don't unplug it or close the app until the update shows as finished. Keep the app itself up to date from the App Store or Google Play, too.

Black cameras in Autodarts Desktop​

If the X works with your phone or tablet but its cameras stay black or on "Starting" in Autodarts Desktop:

  1. Install the latest Autodarts Desktop from autodarts.com/downloads.
  2. Connect the X to the computer with the USB-C cable, with the X's power adapter plugged in too.
  3. Fully close the Autodarts app on every phone and tablet, not just switch away from it. While the app is open, it keeps hold of the X's cameras.
  4. In Autodarts Desktop's Set up cameras step, pick your X from the menu at the top right, not "This computer"; see Set up your cameras.

Still black? Tell us, with a screenshot of the Set up cameras screen including the version number at the bottom.