Skip to main content

Wrong scores and phantom darts

A dart was read into the wrong segment​

Select the dart in the score bar at the top of the match view, move the point to where it actually landed, and confirm with OK. The full walkthrough, with pictures, is in Correcting a misdetected dart.

Don't use Undo for this. Undo takes back the last detected dart, so to fix the first dart of a turn you'd have to undo all three, and fixing darts that way also skews your accuracy statistics.

My correction jumps back​

If you correct a dart and it snaps straight back to the detected value, the match has the Referee setting switched on. With the Referee, nobody can correct darts by hand. Instead, either player taps the robot button on the score row to have the AI review the turn, and a challenged dart only changes if your opponent agrees.

The Referee is a setting for the whole lobby, chosen by whoever set up the match, so you may be in a refereed match without having switched it on yourself. See the Referee setting for how it works.

A dart nobody threw was counted​

An insect landing on the board, or movement close to it, can be picked up as a throw, usually logged as a miss. Press Undo straight away, before you throw your next dart. This is the one case where Undo is the right tool, because the dart you want gone is the last one detected. Throw again first, and Undo would take back your real dart before it reached the phantom one.

The Referee can't fix this afterwards. It works from a picture taken at the moment of each throw, and for a phantom dart that picture shows an empty board, so there's nothing for it to correct.

A dedicated camera setup is built for indoor use. Outdoors, insects, wind and changing light make these false throws much more frequent.

Darts are often missed or misread​

Detection only works as well as the setup around it. Check these, in this order:

  • Nothing wobbles. A board, cabinet or stand that moves when a dart hits it makes the system think the darts are being pulled out, and it stops scoring until things settle. Make sure every part is firmly fixed, including the cameras inside their housings, which can work loose over time.
  • The light is steady. Some lamps flicker faster than the eye can see, and direct sunlight on the board confuses the cameras. Close the curtains, try a different lamp, or use a light ring around the board.
  • The computer can keep up. Autodarts Desktop needs a processor with at least 4 cores at 2.4 GHz. If you've chosen your own cameras, plug each one straight into its own USB port, without a USB hub (an adapter that turns one port into several) in between: not every camera runs reliably through one. An Autodarts Vantage's 3-in-1 hub cable needs a USB 3.1 port or newer. Lowering the camera resolution on the Cameras page is a quick way to test whether your computer is the bottleneck.

If you score with Lens, see Lens missed a dart and My light ring is causing glare instead.

Still getting a lot wrong? Tell us, and include photos of the whole setup and screenshots from Vision taken while the problem happens.